HOME  »  Gearbox Conversion Night #1  (16 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  
DSCN1408 * So here we go night #1. First you have to cut that off. Took me a few reads to under stand that. * So here we go night #1. First you have to cut that off. Took me a few reads to under stand that. * 2288 x 1712 * (1.48MB)
DSCN1409 * bell housing cleaned up with 2 new holes for the plate. * bell housing cleaned up with 2 new holes for the plate. * 2288 x 1712 * (1.39MB)
DSCN1410 * Cutting in progress. * Cutting in progress. * 2288 x 1712 * (1.35MB)
DSCN1411 * Cut and grinded clean, I used some gear oil to lub up the seal. * Cut and grinded clean, I used some gear oil to lub up the seal. * 2288 x 1712 * (1.35MB)
  DSCN1408  
  DSCN1409  
  DSCN1410  
  DSCN1411  
DSCN1412 * Reinstalled. * Reinstalled. * 2288 x 1712 * (1.41MB)
DSCN1413 * Plate installed. There is a gasket which I put some sealant on as per the manual's directions. The bolts use a brake socket hex head. I happen to have one, all bolts done with red locktite. * Plate installed. There is a gasket which I put some sealant on as per the manual's directions. The bolts use a brake socket hex head. I happen to have one, all bolts done with red locktite. * 2288 x 1712 * (1.42MB)
DSCN1414 * A little grinding inside the bell housing. Watch the shaft eh. * A little grinding inside the bell housing. Watch the shaft eh. * 2288 x 1712 * (1.38MB)
DSCN1415 * Installed. Before we could not get the bolt to sit down. Now its great. * Installed. Before we could not get the bolt to sit down. Now its great. * 2288 x 1712 * (1.38MB)
  DSCN1412  
  DSCN1413  
  DSCN1414  
  DSCN1415  
DSCN1416 * Looking good. Its a 5 speed. Note where the oil fill is. On the driver side. * Looking good. Its a 5 speed. Note where the oil fill is. On the driver side. * 2288 x 1712 * (1.42MB)
DSCN1417 * I should have painted that bell housing, but I want to drive. * I should have painted that bell housing, but I want to drive. * 2288 x 1712 * (1.36MB)
DSCN1418 * Flipped over view. I installed the mount at the rear. * Flipped over view. I installed the mount at the rear. * 2288 x 1712 * (1.39MB)
DSCN1419 * Mounting plate, I will do that Friday evening. * Mounting plate, I will do that Friday evening. * 2288 x 1712 * (1.42MB)
  DSCN1416  
  DSCN1417  
  DSCN1418  
  DSCN1419  
DSCN1420 * Another inverted look. * Another inverted look. * 2288 x 1712 * (1.35MB)
DSCN1421 * Release bearing. * Release bearing. * 2288 x 1712 * (1.36MB)
DSCN1422 * Smurf is waiting... I'm not so good at that. * Smurf is waiting... I'm not so good at that. * 2288 x 1712 * (1.43MB)
DSCN1423 * Will drop this bad boy in soon. * Will drop this bad boy in soon. * 2288 x 1712 * (1.37MB)
  DSCN1420  
  DSCN1421  
  DSCN1422  
  DSCN1423  
Album last updated on Oct 05, 2006 - 09:36 PM
Powered by JAlbum 6.5 and BluPlusPlus skin
justdrive.ca