HOME  »  Andre's 1968 Triumph GT6 MK1 - 2009 Photo Gallery » 07 Feb 2009 3.89 & Tach Drive  (24 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  
DSCN4399 * A 3.89 diff from Scott Cypher. * A 3.89 diff from Scott Cypher. * 2288 x 1712 * (1.35MB)
DSCN4400 * This looks to be in good shape. The 3.89 is the stock diff for the an OD GT6. * This looks to be in good shape. The 3.89 is the stock diff for the an OD GT6. * 2288 x 1712 * (1.34MB)
DSCN4401 * FH 8062 I think. * FH 8062 I think. * 2288 x 1712 * (1.29MB)
DSCN4402 * The 3.89 will drop my highway RMP's by about 500 and extend my gears a bit over the current 4.11. * The 3.89 will drop my highway RMP's by about 500 and extend my gears a bit over the current 4.11. * 2288 x 1712 * (1.46MB)
DSCN4403 * Found this in my inspection. Think it was just junk in the box. * Found this in my inspection. Think it was just junk in the box. * 2288 x 1712 * (1.26MB)
  DSCN4399  
  DSCN4400  
  DSCN4401  
  DSCN4402  
  DSCN4403  
DSCN4404 * Overall everything looks good. I will do a spec test in a few days. * Overall everything looks good. I will do a spec test in a few days. * 2288 x 1712 * (1.4MB)
DSCN4405 * 2288 x 1712 * (1.4MB)
DSCN4406 * If I have to take it apart I will blast the case and have it powder coated. * If I have to take it apart I will blast the case and have it powder coated. * 2288 x 1712 * (1.41MB)
DSCN4407 * Ok next project. Tach drive. This old delco unit is shot. Doc from the OVTC told me its trashed. * Ok next project. Tach drive. This old delco unit is shot. Doc from the OVTC told me its trashed. * 2288 x 1712 * (1.41MB)
DSCN4408 * So I've cut the top off and will use it too drive my tach. * So I've cut the top off and will use it too drive my tach. * 2288 x 1712 * (1.34MB)
  DSCN4404  
  DSCN4405  
  DSCN4406  
  DSCN4407  
  DSCN4408  
DSCN4409 * Used the saw too keep James from waking up. * Used the saw too keep James from waking up. * 2288 x 1712 * (1.34MB)
DSCN4410 * 2288 x 1712 * (1.34MB)
DSCN4411 * Thicker then I figured. * Thicker then I figured. * 2288 x 1712 * (1.28MB)
DSCN4412 * This will weld nicely when I find a piece. * This will weld nicely when I find a piece. * 2288 x 1712 * (1.41MB)
DSCN4413 * Shaved a bit of the top of the shaft. * Shaved a bit of the top of the shaft. * 2288 x 1712 * (1.41MB)
  DSCN4409  
  DSCN4410  
  DSCN4411  
  DSCN4412  
  DSCN4413  
DSCN4414 * Ok safety tip. Wear really good glasses. * Ok safety tip. Wear really good glasses. * 2288 x 1712 * (1019KB)
DSCN4415 * This piece of metal hit me in the eye when I was trimming the shaft. * This piece of metal hit me in the eye when I was trimming the shaft. * 2288 x 1712 * (1.18MB)
DSCN4416 * I will buy a better set of glasses. No more gaps. * I will buy a better set of glasses. No more gaps. * 2288 x 1712 * (947KB)
DSCN4417 * Trimmed for a better fit. * Trimmed for a better fit. * 2288 x 1712 * (1.32MB)
DSCN4418 * Sweet. Welding once I find a cover. * Sweet. Welding once I find a cover. * 2288 x 1712 * (1.39MB)
  DSCN4414  
  DSCN4415  
  DSCN4416  
  DSCN4417  
  DSCN4418  
DSCN4419 * 2288 x 1712 * (1.31MB)
DSCN4420 * Drive gear. * Drive gear. * 2288 x 1712 * (1.29MB)
DSCN4422 * I will blast it clean once I'm done welding. * I will blast it clean once I'm done welding. * 2288 x 1712 * (1.32MB)
DSCN4423 * Presto. Cheap tach drive. * Presto. Cheap tach drive. * 2288 x 1712 * (1.33MB)
  DSCN4419  
  DSCN4420  
  DSCN4422  
  DSCN4423  
Album last updated on Oct 25, 2009 - 06:03 PM
Powered by Jalbum 8.5 and BluPlusPlus skin
GT6.ca