Andre's 1968 Triumph GT6 MK1 - 2008 Photo Gallery - 27 Oct 08 Heat Shield Test

HOME » Andre's 1968 Triumph GT6 MK1 - 2008 Photo Gallery » 27 Oct 08 Heat Shield Test (4 Slides)

[Page 1 of 1] :: Jump To

Up one level

DSCN4033 * Joe sent me one of his carb heat shields for a fit test. I'm using my ported MK1 intake for a static test. * Joe sent me one of his carb heat shields for a fit test. I'm using my ported MK1 intake for a static test. * 2288 x 1712 * (1.43MB)

DSCN4036 * With the ported openings the bore seems good, but the stud holes will need to be widen. * With the ported openings the bore seems good, but the stud holes will need to be widen. * 2288 x 1712 * (1.33MB)

DSCN4037 * I will have to do a test on the car too see if the design clears the carbs, linkage, bonnet and exhaust. * I will have to do a test on the car too see if the design clears the carbs, linkage, bonnet and exhaust. * 2288 x 1712 * (1.39MB)

DSCN4038 * More to come. * More to come. * 2288 x 1712 * (1.33MB)

Album last updated on Mar 06, 2009 - 05:00 PM

Powered by Jalbum 8.2 and BluPlusPlus skin

GT6.ca