HOME  »  Andre's 1968 Triumph GT6 MK1 - 2007 Photo Gallery » 03 June 2007 Weekend Shift »  Viewing DSCN2172     [Image 12 of 13]  :: Jump To  
  First slide Previous slide      Show/Hide EXIF Info Index Page Start/Stop the slide show      Next slide Last slide  
Comment: Alt with the old bolt. I was running a stronger one, but when I swap mounts it was too short.
DSCN2165 * Ah replacement bench vise. * Ah replacement bench vise. * 2288 x 1712 * (1.31MB)

DSCN2166 * Ok, new bolts for the shafts, they will have to cut down to size. * Ok, new bolts for the shafts, they will have to cut down to size. * 2288 x 1712 * (1.1MB)

DSCN2167 * Bolt for the alternator. * Bolt for the alternator. * 2288 x 1712 * (1.06MB)

DSCN2168 * Bolt for my racing harness. * Bolt for my racing harness. * 2288 x 1712 * (1.12MB)

DSCN2171 * So, see the mark on the steering column, the spin on oil filter was rubbing on it. I moved it and no more vibration for my steering wheel or bonnet. * So, see the mark on the steering column, the spin on oil filter was rubbing on it. I moved it and no more vibration for my steering wheel or bonnet. * 2288 x 1712 * (1.35MB)
Click for the original image
 
DSCN2172.JPG - 2288 x 1712 - (1.27MB)
Download file (1.27MB)
Jun 03, 2007 - 07:33 PM
DSCN2173 * I have the new slim bolt installed, the thicker bolt will be used once I bore the mount out. This will improve the setup. * I have the new slim bolt installed, the thicker bolt will be used once I bore the mount out. This will improve the setup. * 2288 x 1712 * (1.3MB)
Album last updated on May 05, 2009 - 10:09 PM
Powered by Jalbum 8.2 and BluPlusPlus skin
GT6.ca