HOME  »  Andre's 1968 Triumph GT6 MK1 - 2007 Photo Gallery » 16 May 07 Rear Shafts & Cooler  (5 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  
DSCN2007 * So while removing the stuck trunnion set, the 5 vice let go.
Should be covered under warranty. * So while removing the stuck trunnion set, the 5 vice let go.
Should be covered under warranty. * 2288 x 1712 * (1.37MB)
DSCN2008 * That will be cleaned out. * That will be cleaned out. * 2288 x 1712 * (1.32MB)
DSCN2012 * Stupid thing should not have gotten stuck. * Stupid thing should not have gotten stuck. * 2288 x 1712 * (1.39MB)
DSCN2010 * Testing if the oil cooler will fit. * Testing if the oil cooler will fit. * 2288 x 1712 * (1.35MB)
DSCN2011 * First test looked good, but then I turned the wood the long way. It touches the bonnet. So the cooler will not fit there. * First test looked good, but then I turned the wood the long way. It touches the bonnet. So the cooler will not fit there. * 2288 x 1712 * (1.33MB)
  DSCN2007  
  DSCN2008  
  DSCN2012  
  DSCN2010  
  DSCN2011  
Album last updated on May 05, 2009 - 10:08 PM
Powered by Jalbum 8.2 and BluPlusPlus skin
GT6.ca