HOME  »  Andre's 1968 Triumph GT6 MK1 - 2006 Photo Gallery » 11 July 2006 Trim Install  (6 Slides)     [Page 1 of 1] :: Jump To  
  Up one level  
DSCN0987 * So I orderd some clips for the trim from Spitbits, they bit. Crewed up my paint. So plan B. * So I orderd some clips for the trim from Spitbits, they bit. Crewed up my paint. So plan B. * 2288 x 1712 * (1.33MB)
DSCN0992 * I hope this works. Other wise I dont know what I will do. * I hope this works. Other wise I dont know what I will do. * 2288 x 1712 * (1.37MB)
DSCN0988 * I had used some 1/8 hardboard in the rear, but it was too weak. So I cut a piece of plywood. * I had used some 1/8 hardboard in the rear, but it was too weak. So I cut a piece of plywood. * 2288 x 1712 * (1000KB)
DSCN0989 * Rear trim piece. Mono is being used to glue it down. * Rear trim piece. Mono is being used to glue it down. * 2288 x 1712 * (1.49MB)
DSCN0990 * I have a long piano hinge on the back to flip up the forward board.I will replace the old carpets next. Black would have been nice, but grey was cheap. * I have a long piano hinge on the back to flip up the forward board.I will replace the old carpets next. Black would have been nice, but grey was cheap. * 2288 x 1712 * (1.33MB)
  DSCN0987  
  DSCN0992  
  DSCN0988  
  DSCN0989  
  DSCN0990  
DSCN0991 * The Smurfs are ready for the show. A new owners manual. I have a real one from 67 too. And a small photo album of the restore. * The Smurfs are ready for the show. A new owners manual. I have a real one from 67 too. And a small photo album of the restore. * 2288 x 1712 * (1.33MB)
  DSCN0991  
Album last updated on May 05, 2009 - 09:50 PM
Powered by Jalbum 8.2 and BluPlusPlus skin
GT6.ca