Andre's 1968 Triumph GT6 MK1 - 2006 Photo Gallery - 11 June 2006 Bowling For Power

Up one level

DSCN0852 * So I found a new way to straighten my bowl. * So I found a new way to straighten my bowl. * 2288 x 1712 * (1.42MB)

DSCN0854 * Did does a semi decent job and it was cheap to do. * Did does a semi decent job and it was cheap to do. * 2288 x 1712 * (1.4MB)

DSCN0855 * I've been able to take it from a huge tilt to something a little less. * I've been able to take it from a huge tilt to something a little less. * 2288 x 1712 * (1.39MB)

DSCN0856 * See the 2 red ties, they are my fix. By holding the fuel line still. I've corrected the bowl a bit. * See the 2 red ties, they are my fix. By holding the fuel line still. I've corrected the bowl a bit. * 2288 x 1712 * (1.38MB)

DSCN0857 * Bowl #2 will have to remain as is. The throttle shaft gets in the way. * Bowl #2 will have to remain as is. The throttle shaft gets in the way. * 2288 x 1712 * (1.31MB)

DSCN0858 * I'll turn the bowl's head on #1 so I can reinstall the drain tube. * I'll turn the bowl's head on #1 so I can reinstall the drain tube. * 2288 x 1712 * (1.28MB)

DSCN0859 * I also removed the 2nd fuel filter, but did not see a power increase. So more tuning. * I also removed the 2nd fuel filter, but did not see a power increase. So more tuning. * 2288 x 1712 * (1.41MB)

Album last updated on May 05, 2009 - 09:50 PM

Powered by and skin

GT6.ca