HOME  »  Andre's 1968 Triumph GT6 MK1 - 2006 Photo Gallery » 04 Jan 2006 Clutch & Brake Masters »  Viewing DCP04944     [Image 12 of 22]  :: Jump To  
  First slide Previous slide      Show/Hide EXIF Info Index Page Start/Stop the slide show      Next slide Last slide  
Comment: A little bright, I wish I could replace these caps. They are showing their age, but work still.
DCP04939 * Everything is cleaned and rebuilt. * Everything is cleaned and rebuilt. * 1152 x 864 * (211KB)

DCP04940 * New boot, which was missing from my setup. * New boot, which was missing from my setup. * 1152 x 864 * (167KB)

DCP04941 * Red grease. * Red grease. * 1152 x 864 * (253KB)

DCP04942 * All cleaned and ready for installed, I lubed the chamber before installed the piston. * All cleaned and ready for installed, I lubed the chamber before installed the piston. * 1152 x 864 * (223KB)

DCP04943 * Onto the brake master, pretty well the same, just no manual, box or big bushing. * Onto the brake master, pretty well the same, just no manual, box or big bushing. * 1152 x 864 * (229KB)
Click for the original image
 
DCP04944.JPG - 1152 x 864 - (171KB)
Download file (171KB)
Jan 04, 2006 - 08:28 PM
DCP04945 * I'll reuse that bushing. * I'll reuse that bushing. * 1152 x 864 * (213KB)

DCP04946 * The master, could use a polish, but that will come later. * The master, could use a polish, but that will come later. * 1152 x 864 * (257KB)

DCP04947 * Again no boot to cover the end. * Again no boot to cover the end. * 1152 x 864 * (277KB)

DCP04948 * The piston's rubbers were shot, but rebuild process is the same as the clutch. So all ready for a brake system. * The piston's rubbers were shot, but rebuild process is the same as the clutch. So all ready for a brake system. * 1152 x 864 * (269KB)

DCP04949 * Installed the pedals and mounts with new bolts. * Installed the pedals and mounts with new bolts. * 1152 x 864 * (204KB)
Album last updated on May 05, 2009 - 09:46 PM
Powered by Jalbum 8.2 and BluPlusPlus skin
GT6.ca