Body Work By Wilf Haasper

Up one level

IMG_2525 * 23 May 2005
Passenger wheel well showing new heel board. * 640 x 427 * (46KB)

IMG_2522 * Passenger upper A pillar repairs. * 320 x 480 * (37KB)

IMG_2523 * New inner dog leg. Woof. * 640 x 427 * (52KB)

IMG_2524 * The repair from outside of the car. * 640 x 427 * (49KB)

IMG_2529 * Test fit of the rear panel and door. * 640 x 427 * (20KB)

IMG_2530 * Lower A pillar install. * 640 x 427 * (50KB)

IMG_2531 * Test fit with door in place. The skin of the door will be replaced. * 640 x 427 * (47KB)

IMG_2533 * Very clean. * 640 x 427 * (32KB)

IMG_2534 * Brace in place for support. * 640 x 427 * (58KB)

IMG_2535 * A post repaired. * 640 x 427 * (53KB)

IMG_2542 * Floor is in place, this is a hard part, Wilf hard to make a lot of small patches.
The door is removed and installed several times to ensure a good clean fit. * 640 x 427 * (46KB)

IMG_2536 * Inner sill and strengthener are tach welded in place. * 640 x 427 * (61KB)

IMG_2537 * The outer sill is in place for test fitting. * 640 x 427 * (55KB)

IMG_2538 * Clamped down to hold position. The sills used on this restoration are from Rimmer Bros in the UK.
They are not the cheaper reproduction models. Wilf has told me they have installed very nicely. * 640 x 427 * (65KB)

IMG_2540 * Again door installed to test the gaps. * 640 x 427 * (38KB)

IMG_2541 * A patch wil have to be made up for the fire wall and sill end. * 640 x 427 * (58KB)

Album last updated on May 23, 2005 - 07:09 PM

Powered by and skin

justdrive.ca