Thursday Night Engine Work

DCP04864 * The flywheel was within .001. Very nice. * 1152 x 864 * (267KB)

DCP04865 * Because this is an early MK1 engine and I

DCP04868 * I used 4 conrod locator tubs. And ground them down to size. * 1152 x 864 * (213KB)

DCP04869 * Worked like a charm. * 1152 x 864 * (243KB)

DCP04870 * Stud for the head in place. * 1152 x 864 * (282KB)

DCP04871 * Installing the gasket. * 1152 x 864 * (228KB)

DCP04872 * All good. * 1152 x 864 * (233KB)

DCP04873 * The head, we cleaned it down with brake cleaner. * 1152 x 864 * (236KB)

DCP04874 * Nice block eh. * 1152 x 864 * (258KB)

DCP04875 * We had some drama, 2 smaller studs had to be replaced. * 1152 x 864 * (250KB)

DCP04878 * And the new rocker studs would not fit, I used the old ones. Cleaned them up before installing. All the rockers have been adjusted. * 1152 x 864 * (279KB)