Engine Work Issues

IMG_7035 * Con Rod 6 * 3072 x 2048 * (2.56MB)

IMG_7036 * The small end bearing has a deep score, that needs to be fixed. * 3072 x 2048 * (2.42MB)

IMG_7037 * The crank. * 3072 x 2048 * (3.04MB)

IMG_7038 * Grinded 10 and balanced. * 3072 x 2048 * (3.02MB)

IMG_7039 * One of the drill points for balancing. * 3072 x 2048 * (2.77MB)

IMG_7040 * The head all cleaned. * 3072 x 2048 * (2.65MB)

IMG_7041 * Looks good. * 3072 x 2048 * (2.48MB)

IMG_7042 * NOT GOOD. * 3072 x 2048 * (2.65MB)

IMG_7043 * Looks like something was not done right. * 3072 x 2048 * (2.63MB)

IMG_7044 * I think the head was put into the bag wet. * 3072 x 2048 * (3.09MB)

IMG_7045 * Bad bad bad. It goes back in the morning. * 3072 x 2048 * (3.0MB)

IMG_7046 * Block, I will move fast to avoid rust. * 3072 x 2048 * (2.9MB)

IMG_7047 * Dupli-Colour Cast Iron Engine Paint. * 3072 x 2048 * (2.52MB)

IMG_7048 * Front plate, 3 coats of paint. * 3072 x 2048 * (2.32MB)

IMG_7049 * Rear engine oil seal plate. * 3072 x 2048 * (2.74MB)